Baltic Sea sailing weather

For each Baltic leg, name the sea area and responsible national marine service. The SMHI, FMI, DMI, DWD and Estonian entries on this page are starting points; use the Russia, Latvia or Poland country guides where those waters apply, and check any other coast with its own issuer. Open the issued text and separate warning; compare area boundaries, issue and validity with a delayed strait or harbour ETA. Check water level, seasonal ice, local notices and the entrance separately. If a required issue or warning is unavailable, leave the passage decision open. This page is not a current forecast or clearance to depart. The map is centred approximately on the area, not on your route or a forecast-zone boundary.

1. Primary sources

Choose the named sea area and responsible national marine service for each actual leg: the SMHI, FMI, DMI and DWD links below are starting points for Swedish, Finnish, Danish and German waters, not one forecast for the entire Baltic. For Kaliningrad or the eastern Gulf of Finland, use the Russia source checklist; for the Gulf of Riga or Latvia’s open coast, use the Latvia source checklist. Neither link confirms a current local issue or warning. Open the current issued text and warning separately; compare area boundaries, issue time and validity with the later ETA at a strait or harbour approach. WMO–IMO helps with broad ocean-issuer orientation, not the local coastal bulletin. If a required issue or warning is unavailable, leave the passage decision open.

2. Route and local effects

Mark the open-water leg, island passage and any Danish strait or Gulf of Finland continuation separately; they can require different named products and coastal authorities.

Check wind, waves, visibility and the later arrival against each applicable issue and warning. Water level, seasonal ice information, local notices and the actual entrance need their own checks; refresh the brief if timing or product validity changes.

Before-passage check

  1. Mark departure, exposed legs, arrival and feasible diversions; find the responsible named marine areas for each.
  2. Check warnings, issue and valid times; assess conditions when you expect to reach each leg, not only at departure.
  3. Compare wind and gusts, waves and swell, visibility, thunderstorms and local effects; do not infer conditions on an exposed Baltic leg from a sheltered-harbour report.
  4. Compare recent observations where available, noting their time and exposure; a mismatch calls for another check.
  5. Set the next bulletin check, a reassessment trigger, an alternative and a backup communication channel.

Model map — optional

Windy is a third-party model display, not the issuer of official warnings. Choose a layer and check its valid hour and model run. Nothing loads until you click.

Without JavaScript, open the map separately.

If connectivity fails

Before departure, save the current official text bulletin and warning with issue time. Arrange another way to receive updates, such as an appropriate coastal broadcast, NAVTEX or satellite channel. A saved map cannot replace new warnings.

How to choose weather tools · All sailing areas

Scope: Source list assembled 25 September 2026; check its freshness and coverage before use. This public area guide is not a current personalised forecast, navigational notice service or safety verdict. AI explanation is a closed pilot. Public human expert review is not currently available. Neither accepts requests here. The skipper makes the decision.

Area context

The Baltic is a major home-water cruising region, not simply a passage from the North Sea. An archipelago route, the open Baltic, the Danish straits and the Gulf of Finland have different forecasts and coastal authorities.

Official marine-weather sources

The Swedish SMHI sea forecast names Baltic, strait and gulf areas and gives wind in metres per second. Use the national marine service for each coast or island group actually visited; a Swedish product is not the only authority around the basin. For longer sea-area orientation use the WMO/IMO directory.

Check before a passage

  1. Locate the named sea area for each open leg and the separate local forecast for island passages.
  2. Check wind shifts, visibility, sea level and wave conditions; add ice information when the season and route require it.
  3. Convert units explicitly and verify warning times before a border-crossing or night approach.

What this page does not do

This page does not supply current ice charts or legal border advice. Conditions in narrow archipelago channels cannot be inferred from one Baltic-wide number.

This is not a live forecast or a personal route recommendation. Before departure, check current warnings, issue time and zone boundaries at the original source. AI explanation is a closed pilot. Public human expert review is not currently available. Neither accepts requests here.

Back to the parent sailing area

Sources checked: 24 September 2026.

Local passage-planning dossier

A Baltic overview should lead to the right national sea sector and water-level product.

Forecast sectors and coverage

Use SMHI for relevant Swedish sea areas and DWD for German North/Baltic Sea products; other national coasts require their own issuers. The broad Baltic title does not cover every archipelago, strait or German bay.

Weather-sensitive legs

Check fetch across the chosen open-water direction and shelter at arrival. Even where astronomical tides are small, actual water levels may differ from an assumed average; verify the appropriate water-level product.

Observations, sea state and reassessment

Keep Baltic water-level information separate from a North Sea tide table and from a model current layer. A German bay needs a local reference; a forecast for another national coast is context, not a clearance check.

Worked planning scenario — not a live forecast

For a Kiel/Lübeck-area departure, compare the harbour exit and open-Baltic ETA, then recheck level, wind and warnings near departure. A favourable model wind does not establish usable depth or verify a specific entrance.

Official products by task

  • SMHI sea-weather forecast — Swedish sea-area forecast entry point; check neighbouring issuers for a cross-border Baltic passage.
  • DWD sea-weather products — Choose Nord- und Ostsee, coastal reports and warnings; the portal is not one zone forecast.
  • BSH Baltic water levels — Baltic water-level products; do not infer low-water clearance from a wind-only forecast.
  • BSH modelled currents — Operational model maps, not measured tidal stream at a harbour entrance; inspect freshness.

Sector names help you locate the issuing product; they are not an automatic route-coverage match. Open the current issue and check boundaries, issue time and validity. This page does not display current warnings; an unavailable product does not mean no hazard.

Waters and sailing options

Countries & territories

Build your passage brief

Bring your route, leg timings, vessel and crew profile, checked sources and reassessment triggers into the brief. Personal AI analysis is a closed pilot. Public human expert review is not currently available; neither accepts requests here; a port page does not extend the calculation service’s coverage.

Prepare a passage brief

A Sailing Weather editorial guide to local conditions, practical passage preparation and marine-weather sources. Source and structure review: 27 September 2026. For a specific passage, check current issues, validity and forecast coverage. The skipper retains the final decision and responsibility.

Report a source correction by email

Build a national-service mosaic

A Swedish archipelago day, an open Baltic crossing and a Gulf of Finland leg need different selections. Add SMHI, FMI, DMI or the Estonian issuer according to the actual shore and sea area, not the language of the app. Keep the warning text beside model wind and wave fields. If two neighbouring services use different subdivisions or time periods, compare the overlapping leg instead of treating unlike products as disagreement.

  • SMHI sea-weather services — Shipping/sea-coast forecasts, coastal observations, water-level/wave and ice products.
  • FMI marine-weather interpretation — Observations, marine forecast variables and buoy limitations, including winter removal. For the Finnish leg, obtain FMI's current named-area marine forecast and separate warning; check issue and valid times against your ETA.
  • DMI water-level interpretation — Measured versus forecast level, vertical reference and limits of automated curves.
  • Estonian marine text forecast — Named northern Baltic, gulf and Väinameri sectors; inspect actual validity. Open the current text for your named Estonian sector and its separate warning; check issue and valid times against your ETA before deciding.

Low astronomical tide is not fixed water depth

Look up the water-level reference before comparing it with charted depth. SMHI distinguishes RH2000 and levels relative to mean water; FMI and Estonian services also label their own systems. Do not transfer centimetres between them by assumption. The useful briefing states the selected station, reference, observation age and relevant forecast trend, while a local clearance calculation requires compatible chart information.

Outer exposure, visibility and seasonal ice

An inner-archipelago observation is not evidence for the open stretch beyond the skerries. Check exposed wind and wave information, plus visibility where the plan depends on recognising narrow-channel marks. In ice-relevant conditions obtain a dated ice product; lack of a buoy report may reflect winter removal or a data gap. Reconsider the leg when the intended shelter, level or ice evidence is incomplete, even if a wind-only model looks benign.

Editorial review of this material: 27 September 2026. This date concerns the page content; check current forecast issue times and validity at the original sources.

Related waters, countries and bases